System Pin; First Ring - BT DOMUS User Manual

32 Base settings
The System PIN is used when changing
certain settings and registration /
de-registration. The default setting is
0000. You can change this to your own
preferred 4-digit number.
If you make a mistake, press Clear to
delete digits.
If you enter the incorrect PIN, the
handset will sound an error beep and
return to the base settings menu.
If you have subscribed to your network's
Caller Display service, your BT Domus
does not ring until the caller information
has been received and displayed.
However, if you want your handset to
ring without waiting for the caller
information to be displayed, set First
Ring to On. Please note that this will
mean the first ring you hear will be the
default ringtone. This will change to a
ringtone you have set once the caller
information is displayed for the
caller's number.
If you experience any problems, please call the Helpline on 0870 605 8047* or email bt.helpdesk@suncorptech.com

System PIN

1. Press , scroll
Menu
2. Scroll to
System PIN
3. Enter the old PIN (original setting 0000) and press
4. Enter the new PIN and press
5. is displayed. Re-enter the new PIN and press
Retype PIN

First ring

1. Press , scroll
Menu
2. Scroll to
First Ring
3. Press or to
On
4. Press to return to the previous menu level.
Back
to and press
Base Settings
and press .
OK
.
OK
to and press
Base Settings
and press .
OK
or then press
Off Select
.
Select
.
OK
.
OK
.
Select
to confirm.