5
Digital Effects | Master Control
5.5.1 Firmware Updates
6. Connect a FAT32-formatted USB thumb drive to your computer.
7. Select all five firmware files and either copy/paste or drag them
8. Power on your StudioLive AI mixer.
9. Remove the Wi-Fi LAN adapter (if connected).
10. Plug in the FAT32-formatted USB thumb drive.
Power User Tip: Most small USB drives (16 GB or less) are already formatted correctly, so
no formatting is required. If your computer does not detect your thumb drive, verify that it
is formatted correctly.
to the root of your thumb drive. Once they have copied over,
eject your drive and disconnect it from your computer.
StudioLive™ 32.4.2AI
Owner's Manual
82