PRESONUS AI-Series Owner's Manual page 60

4 Controls
4.9 Solo Bus
2. Press and hold the SIP button in the Solo section until it illuminates.
3. Raise all your channel faders and your main fader to unity gain.
4. Most engineers start with the drums and work from the bottom up, so press the
Kick SnareTop SnareBOT HighHat Tom 1 Tom 2 Floor Tom
5. The Fat Channel will display the dynamics processing, EQ,
6. Using the encoders and meters in the Fat Channel, set
Solo button on your kick-drum mic channel. Notice that all the other channels on
your StudioLive have been muted, and the kick-drum channel is selected.
output routing, and pan settings for the kick drum.
up the compressor and EQ for this channel.
StudioLive™ 32.4.2AI
Owner's Manual
56