PRESONUS AI-Series Owner's Manual page 74

5 Digital Effects | Master Control
5.3 Scenes
3. If you do not wish to recall a certain set of parameters, simply
use the Next and Prev buttons to navigate through the
screen. When the parameter that you wish to disable is
selected, turn the Value encoder counter-clockwise to move
it to the No (off) position. Once you have disabled the
parameters you do not wish to recall, press the Recall button.
The StudioLive's recallable parameters are grouped as follows:
Name: All Channel and Bus names as displayed in the Channel
Info page, VSL-AI, SL Remote-AI, and QMix-AI.
Mute: All mute states. This includes input channels, subgroups, and FX buses.
FX: All parameters for the internal effects assigned to FXA, B, C, and D.
Assigns: All output and bus routing. This includes:
• Channel and bus routing to mains and subgroups
• Stereo linking for all channels and buses
• Digital returns to inputs
• Channel and bus solo states
• Monitor-bus assignments
• 2 Track In assignments
• Talkback assignments and talkback on/off
EQ and Dyn: All Fat Channel dynamics processing, filter
parameters, and pan positions for every channel and bus.
Aux Mix: All aux mixes parameters including:
• Channel sends to aux mixes
• Channel sends to FXA - FXD
• Pre1/Pre2/Post position for each aux and FX bus
Faders: All fader positions.
GEQ: Settings for all 16/12/8 graphic equalizers.
Pots: All digital knob positions:
• Aux output levels
• FXA- FXD levels
• Solo level
• 2 Track In
• Phones level
• Monitor level
• Talkback level (level, not trim control)
• Aux Input A and Aux Input B level
Power User Tip: If you enable knob positions (recalling group "pots") as a part of
your scene recall, all of the digital knobs (Aux outputs, FXA-FXD levels, Solo, 2 Track
In, Phones, Monitor, Talkback, Aux Input A and Aux Input B knobs) will remain at their
stored position until they are moved manually. Once a knob is turned, its value will
jump to the value of its current physical position. Therefore, if you intend to save a scene
and recall the "pots" group later, it is highly recommended that you use the recall sheet
provided in the back of this manual to note the stored position of these controls.
StudioLive™ 32.4.2AI
Owner's Manual
70