PRESONUS AI-Series Owner's Manual page 52

4 Controls
4.5 Subgroups
1. Press the FX button in the Master Control section to access the Effects menu.
3. Press Recall to load it.
5. Next, decide which channels should be sent to the effects bus. In dub and reggae
6. Using the meter section, locate the send encoders for Channels 10 and 11 and turn
2. In the FX C preset load field, use the Value encoder to scroll
through the effects library until you find a suitable delay.
4. Press the FXC Select button to jump to the Parameter Detail
page. This will display every parameter available for the
preset that was loaded, and you can adjust its parameters to
taste. (See Section 5.1 for complete operating instructions.)
music, the vocals are most often sent to a delay, so let's send our two vocalists on
Channels 10 and 11 to that delay. To assign the vocals, select the Mix button on FX C.
them to a little more than 50%.
StudioLive™ 32.4.2AI
Owner's Manual
48