PRESONUS AI-Series Owner's Manual page 48

4 Controls
4.4 Aux and FX Buses
Save
Undo
4. In the Fat Channel, assign Aux In A to the main outputs.
5. Press the Mix button for Aux 1. The Fat Channel meters will display each input
channel's send level to Aux 1. The encoders below each meter control the
channel's level in Aux 1's mix. You will use these encoders to set the send levels for
each channel to the effects processor, the same way you used them to create a
monitor mix. As with creating an internal FX mix, the higher a channel's level is in
the FX mix, the more processed ("wetter") it will sound.
6. Once you have determined your effects mix, you can press the Select button for
Aux 1 to add dynamics processing and EQ to the aux mix before it is sent to the
external effects processor.
7. The Level knob for Aux Input A controls the level of the aux mix relative to the level
of your main mix.
StudioLive™ 32.4.2AI
Owner's Manual
44