Online Help; Dolphin Wireless Manager; Dolphin Wireless Manager Window; Enabling The Radios - Honeywell Dolphin 6000 User Manual

• IP address exceptions for modem connections.
Note: Advanced settings should not be need to be modified. Most ISPs use DHCP addresses.

Online Help

For more information about modem connection setup, tap the Help icon on the setup screens.

Dolphin Wireless Manager

The Dolphin Wireless Manager provides a centralized interface that enables and disables all the on-board radios. Each radio
has its own configuration program. The Dolphin Wireless Manager also provides shortcuts to the configuration utilities for each
radio.

Dolphin Wireless Manager Window

1. Tap > Settings > Connections > Dolphin Wireless Manager.

Enabling the Radios

1. Tap > Settings > Connections > Dolphin Wireless Manager.
2. Tap anywhere inside the rectangle or the OFF button inside the rectangle.
3. The radio begins activating.
4. When the radio is activated (i.e., transmitting a signal), the OFF button changes to ON.
Note: If applicable, information about the radio appears in the rectangle.

Connecting and Synchronizing the Terminal and Workstation

Note: If the workstation is running Windows Vista or Windows 7, you will need to use Windows Mobile Device Center to
synchronize data between your terminal and workstation.
To synchronize data between the terminal and the workstation, ActiveSync (version 4.5 or higher) or Windows Mobile Device
Center must be installed and configured for the appropriate communication type on the host workstation (Windows-based PC)
and the Dolphin terminal. Dolphin terminals ship with ActiveSync already installed. Therefore, if ActiveSync or Windows Mobile
Device Center is already installed on the host workstation, you just need to connect the Dolphin terminal to the host workstation
(via Dolphin peripheral) to initiate communication.
8 - 4