Honeywell Dolphin 6000 User Manual page 29

7. Unlock the memory card latch by sliding the latch away from serial number label located in the battery well.
8. Lift the latch up to expose the MicroSD or MicroSDHC socket.
9. Remove and discard SD card blank and replace with SD card to be installed.
10. Insert a microSD or microSDHC card into the microSD or microSDHC socket.
Note: Make sure the interface on the memory card is connected to the interface in the socket.
11. Align the corner on card with the corner of socket.
12. Close the memory card latch.
13. Lock the memory card latch by sliding the latch toward the serial number label.
14. Insert the SIM card into the SIM card socket.
3 - 7