Booting The Terminal; Using Touch Panel Display - Honeywell Dolphin 6000 User Manual

4. Plug the power adapter into a standard wall outlet. The LED on front of the terminal flashes and illuminates red when the
terminal begins the initializing boot process.
4
1
2
3

Booting the Terminal

The terminal boots when power is applied and the PWR button is pressed for three seconds.
Caution: Do not press any keys or interrupt the boot process. When the boot process is complete, the Home screen
appears and the terminal is ready for use.
Note: The Home screen appears and the CAB files install. The Home screen appears a second time. Wait several seconds
before using the terminal to make sure that the boot process is complete.

Using Touch Panel Display

The touch panel display is activated by using a stylus (included with the terminal) or your finger. To activate the display, open a
file or select a menu. Use the tip of the stylus to tap the touch panel display or gently press the touch panel with your finger.
2 - 3