Chapter 5 - Using The Camera; Overview; Taking A Picture; Pictures & Video Menu - Honeywell Dolphin 6000 User Manual

5
Using the Camera

Overview

The Dolphin 6000 terminal contains a 3.0-megapixel color camera, Automated Camera Control (ACC) and an Application Pro-
gramming Interface (API). The API provides easy access to color picture and video capture functions. The camera lens and
camera flash are located on the back of the terminal.

Taking a picture

1. Tap > Pictures & Videos > Camera.
2. Point the camera lens at an object.
3. Adjust the position of the camera lens to make sure that the object is showing on the screen.
4. Press the Picture/Video button on the side of the terminal to take a picture.
Pictures & Video Menu
Tapping the Menu option on the Command Bar allows you to change camera settings, switch to video mode, or to see more
camera options.
Item
Video
Mode
Brightness
Resolution
Zoom
Focus Mode
Focus Trigger
White Balance
Flash
Options
Full Screen
Descriptions
Start Video Mode
Normal Mode, Burst Mode, Timer Mode
Set the brightness setting from +3.0 EV to -3.0 EV in .5 EV increments
Set picture resolution (i.e., 320 x 240, 640 x 480, 1280x960, 2048x1536)
Set zoom (x1, x2, x3, x4, x5, x6)
Focus On, Focus Off, Focus on Trigger, or Fixed-Focus
When focus mode is set to focus off, use focus trigger to focus the camera on
current scene.
Set mode to Auto, Cloudy, Sunlight, Incandescent, Fluorescent, Tungsten
Turn Camera Flash On or Camera Flash Off
Set General, Slide Show, Camera, and Video options
Sets the screen to full screen view
5 - 1