Storing Batteries; Battery Pack Use And Disposal; Managing Battery Power; Default Critical And Low Battery Points - Honeywell Dolphin 6000 User Manual

Storing Batteries

To maintain optimal battery performance, follow these storage guidelines:
• Avoid storing batteries outside the specified range of -4° to 104° F (-20° to 40°C) or in extremely high humidity.
• For prolonged storage, do not keep batteries stored in a charger that is connected to a power source.

Battery Pack Use and Disposal

The following are guidelines for the safe use and disposal of batteries.
• We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may pose a personal hazard
to the user.
• Follow local regulations for battery disposal.
• Replace defective batteries immediately. Using a defective battery could damage the Dolphin 6000 terminal.
• Do not use a battery in any other manner outside of its intended use in the Dolphin 6000 terminal and peripherals.
• Excessive discharge damages a battery. Recharge the battery when the terminal indicates low battery power.
• Battery life is limited. Replace a battery after it is unable to hold an adequate charge.
• If you observe that the Honeywell battery supplied is physically damaged, please send it to Honeywell International Inc.
or an authorized center for inspection. Refer to
• If you are not sure if the battery or charger is working properly, send it to Honeywell International Inc. or an authorized
service center for inspection. Refer to
• If the battery or charger are not working properly, replace it as soon as possible.

Managing Battery Power

Default Critical and Low Battery Points

When the terminal is running on battery power (as opposed to external power), warnings are displayed when the battery
reaches critical and low battery points.

Checking Battery Power

To check the battery power:
1. Navigate to the Power Menu by selecting

Turning Terminal On/Off

To turn the Dolphin 6000 terminal on:
3 - 10
Product Service and Repair
Product Service and Repair
> Settings > System > Power.
on page 13-2.
on page 13-2.