Yamaha FJR1300A Owner's Manual page 43

proach surfaces that
slippery with caution and avoid es-
pecially slippery surfaces.
When the key is turned to "ON", the
traction control system automatically
turns on.
The traction control system can be
turned on or off manually only when the
key is in the "ON" position and the mo-
torcycle is stopped.
TIP
Turn the traction control system off to
help free the rear wheel if the motorcy-
cle gets stuck in mud, sand, or other
soft surfaces.
NOTICE
Use only the specified tires. (See
page 6-19.) Using different sized
tires will prevent the traction control
system from controlling tire rotation
accurately.
INSTRUMENT AND CONTROL FUNCTIONS
may be Turning on/off the traction control
system
WARNING
Be sure to stop the vehicle before
making any setting changes to the
traction control system. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
To turn off the traction control system,
push the "TCS" button on the multi-
function meter unit for at least 2 sec-
onds. The "TCS" indicator/warning light
will come on.
To turn on the traction control system,
ECA16800 push the "TCS" button again. The
"TCS" indicator/warning light will go off.
EWA15440
1. "TCS" button
2. Traction control system indicator/warning
Resetting
The traction control system will be dis-
abled in the following conditions:
If the traction control system has been
disabled, both the "TCS" indica-
tor/warning light and the engine trouble
warning light come on.
3-28
1
light "TCS"
●
The rear wheel is rotated with the
centerstand down and the key in
the "ON" position.
●
Either the front wheel or rear wheel
comes off the ground while riding.
● Excessive rear wheel spinning.
3
2