Yamaha FJR1300A Owner's Manual page 30

INSTRUMENT AND CONTROL FUNCTIONS
GEAR
4
C.TEMP
3
TIP
The selected information display can-
not be switched while the message "Hi"
is flashing.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
Average fuel consumption display:
FUEL AVG
12.3
The average fuel consumption display
modes "km/L", "L/100km" or "MPG" (for
the UK only) show the average fuel
consumption since the display was last
reset.
●
The "km/L" display shows the av-
˚C
Hi
erage distance that can be trav-
eled on 1.0 L of fuel.
● The "L/100km" display shows the
average amount of fuel necessary
to travel 100 km.
●
For the UK only: The "MPG" dis-
play shows the average distance
that can be traveled on 1.0 Imp.gal
of fuel.
ECA10021
To reset the average fuel consumption
display, use the select switch to select
the information display that contains
the average fuel consumption display.
Push the "RESET" button briefly so that
the average fuel consumption display
flashes, and then push the "RESET"
km/L
button again for at least 2 seconds
while the display is flashing.
TIP
After resetting the average fuel con-
sumption display, "_ _._" will be shown
for that display until the vehicle has
traveled 1 km (0.6 mi).
NOTICE
If there is a malfunction, "– –.–" will
be continuously displayed. Have a
Yamaha dealer check the vehicle.
Instantaneous fuel consumption dis-
play:
The instantaneous fuel consumption
display modes "km/L", "L/100km" or
"MPG" (for the UK only) show the fuel
consumption under the current riding
conditions.
3-15
FUEL CRNT km/L
12.3
●
The "km/L" display shows the dis-
tance that can be traveled on 1.0 L
of fuel.
ECA15473