Yamaha FJR1300A Owner's Manual page 27

Drive mode display
1
1. Drive mode display
This display indicates which drive
mode has been selected: Touring
mode "T" or sports mode "S". For more
details on the modes and on how to se-
lect them, see pages 3-22 and 3-24.
INSTRUMENT AND CONTROL FUNCTIONS
Function display
1
GEAR
N
A.TEMP ˚C
25
GEAR
N
C.TEMP ˚C
Lo
A.TEMP TIME TRIP
0:06
C.TEMP
1. Function display
2. Windshield adjusting function
3. Grip warmer adjusting function
4. Information display selection function
Push the menu switch "MENU" to
switch the display between the wind-
shield adjusting function, grip warmer
adjusting function, and information dis-
play selection function.
Adjusting the windshield position
To move the windshield up, push
the " " side of the select switch. To
move the windshield down, push
the " " side of the select switch.
3-12
Adjusting the grip warmer
This vehicle is equipped with grip
2
warmers, which can only be used when
the engine is running. There are 4 grip
warmer settings.
Setting
Off
4 3
Low
Middle
High
To increase the grip warmer tempera-
ture, push the "
switch. To decrease the grip warmer
temperature, push the "
select switch.
NOTICE
● Be sure to wear gloves when us-
ing the grip warmers.
●
If the ambient temperature is 20
°C (68 °F) or higher, do not set
the grip warmer to the high set-
ting.
Display
3
" side of the select
" side of the
ECA17930