Yamaha FJR1300A Owner's Manual page 25

settings while riding can distract the
operator and increase the risk of an
accident.
TIP
The select switch " /
menu switch "MENU" are located on
the left handlebar. These switches al-
low you to control or change the set-
tings of the multi-function meter unit.
1
1. Menu switch "MENU"
2. Select switch " / "
The multi-function meter
equipped with the following:
●
a speedometer
●
a tachometer
●
a clock
● a fuel meter
● a transmission gear display
INSTRUMENT AND CONTROL FUNCTIONS
●
a drive mode display (which shows
the selected drive mode)
● a function display (which shows
the selected function)
●
an information display (which
" and the shows various information, such
as the odometer reading)
● a setting mode display (which al-
lows you to set, select, or reset the
items shown in the information dis-
play)
●
a self-diagnosis device
2
TIP
●
Be sure to turn the key to "ON" be-
fore
switch "
"MENU", "RESET" button and
"TCS" button.
●
For the UK only: To switch the
meter displays between kilometers
and miles, see page 3-16.
unit is
pushing the select
/ ", menu switch
3-10
Tachometer
2
1
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle sweeps once across
the r/min range and then returns to zero
r/min in order to test the electrical cir-
cuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 9000 r/min and above
3
ECA10031