Yamaha FJR1300A Owner's Manual page 39

2012
Hide thumbs Also See for FJR1300A:
Table of Contents

Advertisement

position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
"
Press this switch to sound the horn.
Start/Engine stop switch "
To crank the engine with the starter, set
this switch to "
", and then push
the "
" side of the switch. See page
5-1 for starting instructions prior to
starting the engine.
Set this switch to "
" to stop the en-
gine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
The engine trouble warning light and
ABS warning light may come on when
the key is turned to "ON" and the start
switch is pushed, but this does not indi-
cate a malfunction.
INSTRUMENT AND CONTROL FUNCTIONS
Hazard switch "
With the key in the "ON" or "
tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
EAU12500
turn signal lights).
The hazard lights are used in case of
an emergency or to warn other drivers
EAU54210
when your vehicle is stopped where it
/
/
"
might be a traffic hazard.
NOTICE
Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.
Cruise control switches
See page 3-6 for an explanation of the
EAU42341
cruise control system.
Menu switch "MENU"
This switch is used to perform selec-
tions in the function display and setting
mode display of the multi-function
meter unit.
See "Multi-function meter unit" on page
3-9 for detailed information.
EAU12733
"
Select switch "
" posi-
This switch is used to perform selec-
tions in the function display and setting
mode display of the multi-function
meter unit.
See "Multi-function meter unit" on page
3-9 for detailed information.
Drive mode switch "MODE"
ECA10061
Do not change the D-mode while the
vehicle is moving.
Using this switch changes the drive
mode to touring mode "T" or sports
mode "S".
EAU12780
The throttle grip must be completely
closed in order to change the drive
mode.
The selected mode is shown on the
EAU54230
drive mode display. (See page 3-12.)
The drive mode cannot be changed
while the cruise control system is oper-
ating.
3-24
/
"
WARNING
EAU54220
3
EAU54690
EWA15340

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents