User Help Menu - Electrolux EWT959 User Manual

12 operating your machine electrolux water aid washing machine
Operating your washing machine

User help menu

Entering the User Help menu
Press the Stain Guide button to enter the User Help menu.
You can do this at any time, even when it is running a wash
program.
How to SELECT and use User Help menu items
the User Help menu appears.
Existing buttons close by the screen take on a new role.
In User Help menu only, the new function of these buttons
is as follows as indicated on-screen.
(Stain Guide is to left of on-screen EXIT)
item. (Fabric is beneath on-screen arrow
Selected menu item is highlighted. Information relating to
item is shown in the right hand display screen.
highlighted User Help menu item ie. select. (Dirt Level is
beneath on-screen SELECT)
The product settings you can change are as follows:
Product Setting
End of Wash Beep
Auto Level Adjust
(Only applies when using the
AUTO water level option)
Drain Pause
The Drain Pause option allows you to save the water either from the wash stage or deep rinsing stage, or from both of these stages of
the wash program, for other uses around the home instead of draining it to waste.
If you are going to save water by pumping it to a laundry trough, the trough needs to be able to accommodate approximately 80 litres
of water, and it should have an overflow to waste to avoid flooding the laundry.
Follow the Drain Pause on-screen instructions to use this feature.
Stay with your machine as it drains to ensure it functions properly and to avoid accidental flooding or siphoning of saved water back
into the washing machine.
)
Options Option description
ON
rinse.
OFF
-20mm Machine fills to a level 20mm below optimum level.
0mm Machine fills to it's calculated optimum water level.
Machine fills to a level 20mm above optimum level.
NONE Normal wash process, no pausing at any drain stage
RINSE Pause at start of draining after DEEP RINSE stage.
User Help menu:
the contents in the Stain Guide menu which provides
hints and tips on how to remove various types of stains.
(See also pages 15 and 16 in this booklet for Stain
Removal Guides)
will show information about your machine eg. serial
numbers and software dates (you may need these if you
call Service).
be able to change product settings.
right hand screen take on a new role as follows:
Press Temp. (below arrow) to highlight the setting
Press Favourite (below MODIFY) to change the option.
Factory
default
ON
0mm
NONE