Favourite Button; Using The Select Option And Modify Option Buttons; Water Level; Auto Water Level Option - Electrolux EWT959 User Manual

Favourite button

To recall the Favourite wash program,
press once and release the Favourite
button.
In the left hand screen, you will get
acknowledgement the Favourite program
is loaded.
You can recall a Favourite wash program ONLY when the
washing machine is:
– in the program selection mode or
– running in a Delay Start stage of a wash program.
Otherwise pressing Favourite will have no effect.
The first time you press Favourite, a factory-set favourite
wash program will load for you. If you want to use the
Favourite program shown in the display screens and not
make any changes, press Start/Pause to begin your wash.
To re-program Favourite with your own selections and save
them, proceed as follows:
of entering the re-programming mode shows in the left
hand screen.
press Start/Pause.

Using the Select Option and Modify Option buttons

The Select Option and Modify Option buttons are used to
change the settings shown on the right side of the right
hand screen.
Press the Select Option button repeatedly until the option
you wish to modify is highlighted in the screen.
Then press the Modify Option button repeatedly to modify
the selected option to your desired setting.
The following sections describe the options available and
the setting that can be selected using the Modify Option
button.
electrolux water aid washing machine operating your washing machine 9

Water level

Alternatively, you can select a manual water level choosing
the one most appropriate for the wash load you have.
Selection Water level description
AUTO
ALL THE SETTINGS BELOW ARE FOR MANUAL
XLO
LO
MED
HI
XHI

AUTO water level option

level, the machine will conduct a series of water fill and
short agitations to determine the amount of water needed.
Normal wash agitation will commence when there is
sufficient water in the washbowl.
If you add more clothes to the washbowl after an AUTO
water level wash program has started, the machine will
determine if extra water is needed and add it.
For AUTO water level, the amount of water the machine
determines is needed for a load is an optimised level. You
can adjust the AUTO level to be a small amount above or
below the optimised level if you consider the amount of
water you normally get using the AUTO option is too high or
too low. This option is available at the Adjust Settings sub-
menu in the User Help Menu. (See page 12)

Manual water level options

If you make a manual water level selection, ie. a level other
than AUTO, do not overfill the washing machine. Use only
the amount of water you need for the wash load.
Do not overfill the washing machine if setting water
level manually.
button to turn on your washing
machine, AUTO water level is
use AUTO water level whenever you
can. The AUTO water level ensures
just the right amount of water is used
for the wash load.
The exact water level
required to wash your clothes
effectively is determined and
set for you automatically,
ensuring no water is wasted.
WATER LEVELS, DEPENDING ON LOAD SIZE
Extra low
Low
Medium
High
Extra high
tips and information
caution
Indication bars
on screen
No bars on screen
One bar I
Two bars II
Three bars III
Four bars IIII
Five bars IIIII