Spin Speed And Drip Dry Option; Drip Dry; Progress Of Your Wash Program; Lid Locked - Electrolux EWT959 User Manual

tips and information
You cannot select either Eco rinse or FastEco rinse with the
DRIP DRY spin option.
Eco rinses are not designed to be used with fabric softener.
Select Deep rinse if you are going to use fabric softener.
Deep rinse ensures the fabric softener is correctly dispensed
and thoroughly removed from your clothes during rinsing.
If your cold water supply pressure is low, Eco rinse
might not be fully effective in rinsing suds from your
clothes. If this is the case then use Deep rinse.

Spin speed and drip dry option

You can select either one of the Spin
speeds or the DRIP DRY (no spin) option.
The display screen will show you the
spin speed in rpm for the selection you
make or DRIP DRY.
There are three levels of spin speed you
can select from indicated by the bars
shown between SPIN and speed rpm at
the spin option in the right hand screen.
One bar l on screen is low spin speed.
Two bars ll on screen is medium spin speed.
Three bars lll on screen is high spin speed.
Actual spin speeds will vary with, and be appropriate to, the
Fabric selection.
The fourth selection you can make is DRIP DRY. (No spin)
NOTE: Select a Deep rinse option for a drip dry wash. You
cannot select DRIP DRY when either Eco rinse or FastEco
rinse option is selected.
Drip dry wash information
Drip dry clothes, clothes that need to
be taken out of the washing machine
dripping wet, do not require a spin cycle
after deep rinse.
At the end of the drip-dry normal rinse,
the washing machine will stop. In the left
hand screen you will be prompted to remove the drip dry
clothes from the washbowl.
Open the lid and remove the drip dry clothes.
To drain the remaining water from the washing machine,
simply close the lid.
electrolux water aid washing machine operating your washing machine 11

Progress of your wash program

Once you have started your wash by pressing Start/Pause,
you can see what your machine is doing and where it is in
the wash program by looking at the screen displays.
Animations are shown on the left hand screen representing
the stage in the wash. You will see animations representing
stages eg. fill, wash, rinse, spin, etc as shown below.
In addition, on the right hand screen each stage is highlighted
as it takes place during the progress of your wash.
If you wish to advance to the next stage of the wash
program eg. stop the wash agitation stage and go to rinse
and spin, press the Fabric button and select RINSE&SPIN
program.

Lid locked

The lid will be automatically locked when the washbowl is
spinning during a wash program.
To fill and agitate, the lid must be closed, but will not be
automatically locked.
If the lid is open and the machine is waiting for it to be
closed for the wash program to continue, you will get a
message on the screen telling you to close the lid.
Should you need to access the washbowl during spin,
press Start/Pause. You will have to wait a short time for
the bowl to stop spinning before the lid unlocks and the
'SAFETY Lid is locked' message disappears.
If then you open and close the lid, and the machine is still in
a spin stage of the wash program, the lid will lock and the
machine will continue to complete the spin stage.
top panel of the washing machine.
to disable it or otherwise change the way it works.
The message 'SAFETY Lid is
locked' will appear in the right
hand display screen to advise
you when the lid of the washing
machine is locked in the closed
position.
warning