Extron electronics 100 User Manual page 7

General
I/O Modules
Configurations
1-1
Each Extron Matrix 100 is custom designed to the user's specifications. The
configuration is built from various combinations of ten I/O modules. The I/O
modules and possible configurations are listed below. The Matrix 100 can be
controlled from a host computer or from a QuickSwitch Front Panel Controller
(QS-FPC).
Matrix units can also be interconnected to expand the switching capabilities for
up to 48 inputs by 48 outputs. This allows for multiple switching combinations.
Matrix 100 Switchers are ordered for a specific application with a combination of
I/O modules. Each module switches one type of video signal – one for red, one
for blue, etc. One audio module switches both left and right stereo channels.
• 4 x 4 Medium-Resolution Analog Module (MRAM), 175 MHz video bandwidth
• 8 x 4 Medium-Resolution Analog Module (MRAM), 175 MHz video bandwidth
• 8 x 8 Medium-Resolution Analog Module (MRAM), 175 MHz video bandwidth
• 4 x 4 Sync Module
• 8 x 4 Sync Module
• 8 x 8 Sync Module
• 4 x 4 Video Module
• 8 x 4 Video Module
• 8 x 8 Video Module
• 8 x 8 Stereo Audio Module
For example: a Matrix 100 designed to switch RGB, separate horizontal and
vertical sync, and stereo audio will require the following modules: three MRAM,
two Sync and one audio modules.
Depending upon the configuration of I/O modules (above), the Matrix 100
Switcher can have up to 16 different input/output configurations. The
configuration determines how many modules are required.
• RGsB – Red, Green, (sync on green), Blue
• RGBS – Red, Green, Blue and separate composite Sync
• RGBHV – Red, Green, Blue and separate H&V Sync
• RGsBCv – Red, Green, (sync on green), Blue, and Composite video
• RGsBYC – Red, Green, (sync on green), Blue and S-Video
• RGBSCv – Red, Green, Blue, composite Sync, and Composite video
• RGsBA – Red, Green, (sync on green), Blue, and Audio
• RGBSA – Red, Green, Blue, Sync, and Audio
• RGBHVA – Red, Green, Blue, separate H&V sync, and Audio
• RGsBCvA – Red, Green, (sync on green), Blue, Composite video, and Audio
• RGsBYCA – Red, Green, (sync on green), Blue, S-Video, & stereo Audio
• RGBSCvA – Red, Green, Blue, composite Sync, Composite video, and Audio
• CvA – Composite video, and Audio
• YCA – S-Video with Audio
• Cv – Composite video
• YC – S-Video
Chapter 1 • Introduction to Matrix 100
Extron • Matrix 100 • User's Manual