Zoom Wireless-N User Manual page 58

Filtering Policies
You can select one of the two filtering policies. You can either allow or deny data that
matches the filtering rule to pass.
Filtering Rules
You can specify eight rules for each direction: inbound or outbound. For each rule,
you can define the following:
Source IP address
Destination IP address
Destination Port
Schedule Rule#
For the Source or Destination IP address, you can define a single IP address
(4.3.2.1). An empty field implies any IP address.
For Destination Port, you can define a single port (80) or a range of ports
(1000-1999). No prefix indicates both TCP and UDP are defined. Leaving this empty
implies that all port addresses apply.
Each Rule can be enabled or disabled individually.
You can use packet filters with scheduling rules for more access control flexibility.
58 Wireless-N 4-port Router User Manual