Important: Use only the power cube shipped with the Wireless-N 4-port Router. Other
power cubes may damage the device.
6
Turn on the computer. The connected Ethernet (LAN) port light should start blinking. If the
connected Ethernet (LAN) light doesn't blink, please see
Using the Setup Wizard
To launch the Configuration Manager, please follow these steps:
1
In the computer's Web browser address bar, type http://192.168.2.1 and then click
Enter.
2
When the USER'S MAIN MENU opens, it displays a Status page that lists the
current values for a variety of settings. If the Status page doesn't appear, please see
Appendix A: Troubleshooting
3
In the System Password field, type admin and then click Login.
Note: Later, if you change the System Password, you will use the new password to log
in.
Appendix A: Troubleshooting
Tips.
23
Tips.