Zoom 4403 Setting Up
Wireless-n 4-port router setting up as a repeater or as a wireless bridge
Hide thumbs
Also See for 4403:
- User manual (91 pages) ,
- Specifications (2 pages) ,
- Quick start (2 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Zoom 4403
Summary of Contents for Zoom 4403
- Page 1 Wireless-N 4-port Router Setting up Model 4403 as a Repeater or as a Wireless Bridge...
-
Page 2: Wireless Bridge
Chapter 2. If you do not have the CD, the manual can be downloaded at http://www.zoomtel.com/documentation/wireless_n/4403_UserManual_Eng.pdf Then for the first model 4403, the one being used as a Repeater or Wireless Bridge, follow the steps below for Setting Up Model 4403 in Hybrid mode or WDS Only mode... - Page 3 Turn on the computer. The connected Ethernet (LAN) port light should start blinking. If the connected Ethernet (LAN) light doesn’t blink, please see Appendix A: Troubleshooting Tips of the full length manual on the CD that came with the Model 4403. If you do not have the CD, the manual can be downloaded at http://www.zoomtel.com/documentation/wireless_n/4403_UserManual_Eng.pdf.
- Page 4 If the Status page doesn’t appear, please see Appendix A: Troubleshooting Tips of the full length manual on the CD that came with the Model 4403. If you do not have the CD, the manual can be downloaded at http://www.zoomtel.com/documentation/wireless_n/4403_UserManual_Eng.pdf.
- Page 5 Select the Security type and enter the corresponding Key. The security type needs to be the same as your AP. If your AP isn’t a second 4403, you must select WEP Auto security (which we recommend) or None.
- Page 6 2 above.) Make sure that the base router is using the same security type as the Model 4403 Repeater. (This is normally WEP.) If the base router is using WEP security, the base router’s security key should be the same as the model 4403 Repeater’s security key.