Zoom Wireless-N User Manual page 11

Configuring the Dynamic IP Address
The page shown below only appears if you select the Dynamic IP Address button on the
Select WAN Type menu or Auto Detect found a connection using Dynamic IP. Otherwise skip
this section.
•
Host Name (optional)
This is the name that identifies your Wireless-N 4-port Router. Some service providers
require a host name. Your service provider supplies this name, if needed. Most users
don't need to enter a host name.
•
Enable Mac Cloning
This is the 12-digit Media Access Control (MAC) address of your Router. Cable
Modem users should click the Clone MAC button to get the MAC address that was
registered with your service provider for your device. Use the computer that was
connected to your cable modem when cloning the MAC address.
Click Next to continue.
Go to Step 3. Wireless Settings
11