Zoom Wireless-N User Manual page 41

You will also be able to click a link to open the Wireless Network Connection Properties
dialog box. If this happens, click the link, clear the Use Windows to configure my wireless
network settings check box, and then click OK. You can then use the software provided with
your wireless adapter without interruption from Windows.
More than one wireless network may appear in the list. These are other wireless networks that
are within range of your network. Your neighbors, for instance, may be within range of your
network. Each wireless network has a channel associated with it. We recommend there be at
least a five-channel difference between your network and those of your neighbors. Having less
than a five-channel difference may result in interference with your connection. By default, the
Wireless-N 4-port Router uses channel 10. If you need to change this channel, you must do so
using the Wireless Setup page of the Zoom Configuration Manager. For instructions on
how to log in to the Zoom Configuration Manager, see page 7. After logging in, select
Wireless from the left-hand menu. On the Wireless page you can select a new channel from
the drop-down menu.
2
Test your wireless connections. From each desktop or notebook computer that you set up,
open your Web browser (for instance, Internet Explorer or Firefox) and try to connect to a
familiar Web address.
If you connect successfully, you are ready to browse the Web!
To disconnect from the current network:
1
On your computer that has a wireless adapter, find the wireless network connection option
(similar to the process of adding your computer to the network).
2
Click or highlight the Wireless-N 4-port Router's Network ID.
3
Select or click on Disconnect or similarly-named button.
In the unlikely event you need to make changes to the Wireless-N 4-port Router's advanced
settings please see Chapter 7, Using the Configuration Manager's Advanced
Otherwise, your set up is complete. Congratulations!
Program.