Table of Contents
Advertisement
4. When finished, press the STOP
RECORDING button. The text box displays
New OGM Recorded!
After a short time the text box clears and you
may record another outgoing message or
leave the mailbox.
TeleSMART Operation Using a TeleSMART Touchpad
If using a standard TeleSMART Touchpad, options are accessed differently than
they are through the iCenter interface. Follow the instructions below if using a
standard TeleSMART Touchpad. Each option is identified by a 2-digit number (01-
24). After accessing the system, the first option (Hear Messages) is displayed.
ccessing the
A
The TeleSMART system has three levels of access as shown below:
the programmed Quick Access key
your user code + [ ]
NOTE: If calling in from a remote phone, dial your
home number, then press [#] followed by your user
code + [ ] during the greeting message.
the Master code + [ ]
TeleSMART Messaging Features (Cont'd)
ACTION
ystem
S
ENTERING...
SCREEN
LETS YOU...
hear messages in the common mailbox only,
and use menu options 01 - 07, listed on the
next page
hear messages in all mailboxes to which you
have access, and use menu options 01 - 07,
listed on the next page
use all menu options
6
1
Advertisement
Table of Contents
