Table of Contents
Advertisement
Security System Operation (cont'd)
How to Bypass Zones
The Bypass function is used when you want to arm your system with one or more
zones intentionally unprotected. Bypassed zones are unprotected and will not cause
an alarm when violated while your system is armed.
1. The system will not allow you to bypass fire or emergency zones.
2. To bypass zones, the system must be disarmed first.
To bypass zones do the following:
1. From the "Home" screen, press the
SECURITY button. The "Arming" screen is
displayed.
2. From the "Arming" screen, press the MORE
CHOICES button. The "More Choices" screen
is displayed.
3. Press the SHOW ZONES button on the
"More Choices" screen. The "Zones" screen is
displayed.
NOTE: While iCenter is requesting and
receiving the zone data from the control panel,
the "Zones" screen displays "Getting Zone
Status...".
20
ACTION
SCREEN
Advertisement
Table of Contents
