Advanced System Features (Cont'd)
ACTION
SCREEN
2. Enter the code for the desired action. The
action codes are the events that are to take
place when either the system exits the #77
Mode or the scheduled time is reached,
depending on the action selected.
Press [.] to continue.
Enter the action specifier. This defines what
the action will affect (relay, relay group,
partition, zone list, user group). The action
specifier screen prompt varies, depending on
the type of action selected.
As an example, if you selected "Auto Bypass"
as the action, the action specifier prompt would
be:
ZONE LIST ?
3. Enter 1 (YES) or 0 (NO).
Press [/] to continue.
NOTE: Immediately after the [.] key is
pressed, the specified action occurs.
101