Table of Contents
Advertisement
Security System Operation (Cont'd)
How to Disarm the System
MP OR T
N T:
A
If you return and the main burglary sounder is on, DO NOT enter
I
the premises, but call the police from a nearby safe location. If you return after an
alarm has occurred and the main sounder has shut itself off, iCenter will beep
rapidly upon entering, indicating that an alarm has occurred during your absence.
and C ON T
CT THE P O L
LE
E
MMED
TEL
CE
AV
A
Y
A
from a nearby safe
I
I
I
location.
Disarm the system as follows:
ACTION
SCREEN
1. Press the DISARM button on any "Armed"
screen. The "User Authorization" screen is
displayed with the instructions To Disarm,
Enter Code.
2. Enter your 4-digit user code. The Partition
No. & Description screen is displayed.
3. Press the DISARM ALL button if you wish
to disarm the system. iCenter beeps once and
the "Arming" screen is displayed showing the
system as Ready to Arm or not ready if any
zone is faulted (open).
NOTE: If you wish to disarm only selected
partitions, you must first highlight the
partition(s) to be disarmed, then press the
DISARM SELECTED button. iCenter beeps
once and the "Arming" screen is displayed
showing the system as Ready to Arm or not
ready if any zone is faulted (open).
23
Advertisement
Table of Contents
