ADT iCenter 8142ADT User Manual page 76

Advanced user interface
Table of Contents

Advertisement

TeleSMART Messaging Features (cont'd)
ENTER LOCATION
-- (01-25) # - END
LOC XX MB XX RN XX
(XXX) XXX-XXXX
(Caller ID Review Prompt)
DISTINCT RING?
1-YES 2-NO 8-MNU
ENTER DIST. RNG:
-(0, 2-5) #-END
MAILBOX?
1-YES 2-NO 8-MNU
ENTER MAILBOX:
-(1-4) #-END
VOICE TAG?
1-YES 2-NO 8-MNU
VOICE TAG:
1-REPEAT
VOICE TAG:
RECORD AT TONE!
When finished, press [8] to return to the Caller ID Location prompt, then press [8]
again to return to the Main Menu, or press [9] to exit the system.
6
7
3. Press [1] from the previous prompt, then enter the 2-digit location
number for storing Caller ID settings for a particular phone number.
The system displays the current settings for this location, where:
LOC = location no. (01-25); MB = mailbox (1-4)
RN = distinct ring count (2-5); "x" = phone number
The system automatically advances to the next prompt.
4. Press [1] (yes), then enter the distinctive ring count (2-5) for calls
from this phone number.
The distinctive ring lets you identify a caller by the number of short
rings the system makes when calls are received from that caller.
The system automatically advances to the next prompt.
To skip the "Distinct Ring" prompt, press [2] (no).
5. Press [1] (yes), then enter the mailbox number where you want
messages received from this phone number to be stored.
The system automatically advances to the next prompt.
To skip the "Mailbox" prompt, press [2] (no).
6. Press [1] (yes) if you want to record a voice tag for this phone
number. If a voice tag is recorded, it is announced when calls from
this number are received.
Select from the options described below:
(Pressing [ ] or [#] displays the choices on the bottom line.)
Voice Tag Menu
1 – Repeat
Press to play back voice tag.
3 – Erase
Press to erase the voice tag.
6 – Record
Press to begin recording voice tag (see display at
left). Press any key to stop the recording.
8 – Menu
Advances to the "Override Privacy" prompt.
After voice tag is recorded, press [8] to continue.
To skip the "Voice Tag" prompt, press [2] (no).

Advertisement

Table of Contents
loading

Table of Contents