Readytools Dial; How To Clean Carpets; Pretreating - Bissell 1692 PowerSteamer Clearview User Manual

™
ReadyTools Dial
This provides floor or upholstery cleaning with the turn of a dial. For
carpet/floor cleaning make sure the dial is set to FLOOR CLEANING.
For upholstery or fabric cleaning, select your cleaning tool, attach it to
the Flex Hose, switch to Tools Settings and the PowerSteamer is
ready to clean upholstery, fabrics and more*
* Set the switch to FLOOR CLEANING when cleaning
carpets, or set it to TOOLS/PRETREAT when using
the Flex Hose attachments.

How To Clean Carpets

Plan activities to give carpet time to dry.
1.
Remove easily moved furniture from the room (chairs,
2.
lamps, coffee tables, etc.).
Vacuum thoroughly to pick up loose debris and pet hair
3.
before using the PowerSteamer.
Plan your cleaning route to leave an exit path. It is best to
4.
begin cleaning in the corner farthest from your exit.
NOTE: You may notice hair and debris deposits on
carpet that were loosened by brushing action
(especially with newer carpets that have never
been deep cleaned before). This debris should be
picked up by hand and thrown away. Debris that
deposits in the Brush Belt area should be cleaned
out to keep Belts running free.

Pretreating

Improves cleaning effectiveness for heavily soiled carpet in high
traffic areas, such as entryways and hallways.
Set the ReadyTools Dial to TOOLS/PRETREAT.
1.
Plug the PowerSteamer into a proper outlet and turn ON the
2.
Power switch.
While pressing the Spray Release trigger, slowly make sev-
3.
eral passes over the area to be cleaned.
Caution: Do not overwet.
Turn the machine Power Switch OFF and let the
4.
BISSELL Advanced Deep Cleaning Formula
dissolve the tough soil for 1 to 2 minutes. Reset the
ReadyTools Dial to FLOOR CLEANING
before continuing.
3
4
9