To Fill The Tank-In-Tank - Bissell 1692 PowerSteamer Clearview User Manual

To Fill The Tank-in-Tank

This easy-to-use system is designed with a bladder inside to
hold clean water. As you clean, the bladder will empty. Dirty water
collects in the tank outside the bladder.
NOTE: Make sure to add formula to the tank
before filling it with water.
Depress the Handle Release pedal to tilt back
1.
the handle.
Lift the Tank-in-Tank handle. The handle locks the lid in
2.
place. Carry the Tank-in-Tank like a bucket to fill at the sink.
Set the Tank down and rotate the handle forward to
3.
unlatch the Lid. Lift off and set the Lid aside.
Using the Measuring Cup, pour BISSELL Deep Cleaning
4.
Formula into the mouth of the bladder.
Fill to the bottom of the neck with hot tap water. Do not
5.
boil or microwave water.
NOTE: Fill slowly to reduce sudsing.
Replace the Tank Lid, matching the Lid and Tank edges.
6.
Rotate the handle to carrying position. Replace Tank in
machine base, seating firmly in place. Rotate handle
back down to latched position.
Tilt Handle
Back
1
Handle
Release
2
Lift and
Carry
Rotate Handle to
Unlatch
3
4
5
6
7