Cleaning Bare Floors; Normal Cleaning - Bissell 1692 PowerSteamer Clearview User Manual

Normal Cleaning

Plug the PowerSteamer into a proper outlet and turn ON the
1.
Power Switch.
While pressing the Spray Release Trigger, make one slow
2.
forward and back wet pass. Let the BISSELL Advanced
Deep Cleaning Formula and DirtLifter PowerBrush* do the
work for you.
*On select models
Caution: Do not overwet.
Release the Trigger and make one slow forward and back
3.
pass over the same area to remove any residual dirty water.
Repeat cleaning passes without pressing the Trigger until
4.
you can't see any more water being suctioned up.
When cleaning job is complete, refer to the
5.
Maintenance/Storage section on page 13.

Cleaning Bare Floors

The Bare Floor Tool (available with select models
only) provides effective cleaning for linoleum, vinyl,
and tile floors.
Caution: Do not use on hardwood floors
Use BISSELL Floor Cleansing Formula.
1.
Vacuum or sweep thoroughly to pick up loose debris and
2.
pet hair.
Remove easily moved furniture from the room, (chairs,
3.
tables, etc.)
Plan your cleaning route to leave an exit path.
4.
Plan activities to allow 30 minutes for the floor to
5.
dry completely.
10
Tip:
Thorough
vacuuming before
deep cleaning will
prevent early
clogging of the
lint trap.