Readytools Dial; The Flow Indicator - Bissell 7901 - AUTRE User Manual

When It's Time to Empty Tank-in-Tank Continued
Remove Tank Lid by rotating handle forward to unlatch
3.
lid and lifting lid off Tank.
Pour out dirty water.
4.
After each use, remove and rinse the Lint Screen located
5.
on the tank lid.
A. Remove Tank Assembly from unit.
B. Remove Tank Lid.
C. Remove any debris caught in Lint Screen.
D. Re-insert Lint Screen on Tank Lid. The screen will
click into place
E. Replace Tank Lid.
F. Re-insert Tank Assembly into unit.
Refill with clean hand hot tap water, following steps 5
6.
through 9 on page 8, and refill the SmartMix Bottle with
BISSELL Advanced Deep Cleaning Formula
as necessary.
When the cleaning job is complete, rinse out the
7.
Tank-in-Tank by rinsing clean water between the Bladder
and Tank.
Return Tank-in-Tank to the machine, following steps 6
8.
through 9 on page 8.
Refer to the Maintenance section on pages 15-16 for
9.
the final cleanup.

The Flow Indicator

The Flow Indicator is located on the machine base. It spins when the
trigger is pressed to indicate that the machine is applying
cleaning solution to the floor. It will stop spinning to indicate that the
SmartMix Bottle or Bladder needs to be refilled, or when the trigger
is released.
Note: Flow Indicator does not spin when set to
Tools/PreTreat setting.

ReadyTools Dial

This provides above floor cleaning with the flip of a switch.
Just choose the cleaning tool, attach to the Flex Hose and
ProHeat II is ready to clean upholstery, stairs and more.*
*Set the ReadyTools Dial to Floor Cleaning when
cleaning carpets or bare floors or set it to Tools/
PreTreat when using the Flex Hose attachments
or for pre-treating floors.
SmartTemp heats the cleaning solution for carpet
and bare floor application only. It does not heat
solution sprayed through the accessory tools.
3
Rotate Handle to
4
dirty water
unlatch
5C Lint Screen
Fill bladder
8
only with clean
6
hand hot tap
water
Tip:
A special red float
device in the Tank
will cause the cl e an-
er to stop removing
solution from the
Tip:
carpet and the
motor sound will
Thorough
rise in pitch to
vacuuming
let you know the
before deep
dirty water tank
cleaning will
is full.
prevent early
clogging of
Lint Screen.
Flow Indicator
ReadyTools Dial
Pour out
5D
Latched
9