Dhcp - Tenda A5 User Manual

been wirelessly connected to your router.
Bandwidth: Displays the channel channel bandwidth used by the
currently connected hosts (connected wireless clients).
Note:"Bandwidth" refers to the wireless channel bandwidth
instead of wireless connection rate.

3.3 DHCP

3.3.1 DHCP
The Dynamic Host Configuration Protocol (DHCP) is an
automatic configuration protocol used on IP networks. If you
enable the built-in DHCP server on A5, it will automatically
configure the parameters of TCP/IP protocol for all your LAN
computers (including IP address, subnet mask, gateway and DNS
etc), eliminating the need for manual intervention. Be sure to set
your computers to be DHCP clients by setting their TCP/IP
settings to "Obtain an IP Address Automatically". When you turn
your computers on, they will automatically load the proper TCP/IP
settings provided by the A5.
DHCP Server: Check or uncheck the box to Enable or
disable the device's DHCP server feature.
IP pool start address: Enter the starting IP address for the
DHCP server's IP assignment.
A5 150Mbps Travel Wireless N Router User Manual
41