Tenda A5 User Manual page 20

A5 150Mbps Travel Wireless N Router User Manual
System will populate the SSID and Channel fields automatically.
Here we take the SSID of ChinaNet-pxKA as an example for
illustration
Step4. Check "Security" field, if it shows "none" Click "Apply" and
go to next step. But if it shows WEP/WPA or other encryption
modes, that means the wireless ISP service you try to connect is
encrypted, and you need to configure wireless security as same
as the wireless network. Go to "Security Mode", select the security
mode and Algorithms, and enter the security key to complete
setting. Security mode, algorithms and key in this example shown
below are WPA-PSK, AES and abcd1234 respectively. Click
"Apply" to save your settings.
Note: Your setting must exactly match your wireless ISP's. If you
are not clear about them, contact the ISP for assistance.
Step5. Enter WAN Settings interface and select your Internet
connection type (For example, select Dynamic IP if your wireless
ISP does not provide you any IP information.).
19