2.2 Configure Your PC to Connect to A5 Wirelessly
By default, the RJ45 port is used as a WAN port, so you can
only connect to A5 via a wireless connection. The wireless
security feature is disabled by default. So there is no need to enter
a security key for first-time connection to A5.
To configure your PC to connect to A5 wirelessly, Windows
XP users refer to section 2.2.1 and Windows 7 users skip to
section 2.2.2.
2.2.1 In Windows XP
Step1. Right click "My Network Places" and select "Properties".
Step2. Right click "Wireless Network Connection" and select
"Properties".
Step3. Select "Internet Protocol (TCP/IPv4)" and then click
"Properties".
A5 150Mbps Travel Wireless N Router User Manual
9