Tenda A5 User Manual page 33

Enable Bandwidth Control ： Check the box to enable
bandwidth control.
IP Address：Enter an IP address (same number in both
boxes) or a range of IP addresses (different numbers in two
boxes) of the PCs whose traffic you want to regulate.
Upload /Download：You can select either to limit Uplink or
Downlink Bandwidth of PCs within a specified IP range.
Bandwidth Range：Maximum and minimum data flow which
is permitted to be uploaded/downloaded by computers within
a specified IP range. Unit is Kbytes/s. (For WAN bandwidth
range, consult your ISP.)
Enable: Check the box to enable edit. Leaving it unchecked
means disabling the function.
Add to List: Click it to add currently edited bandwidth control
rule to the list when finishing.
1. For example: Suppose that you have a 2M WAN connection,
then maximum download and upload rates in theory will be
2Mbps=256KByte/s and 512kbps=64KByte/s. And you want
the PC at the IP address of 192.168.2.100 to have
A5 150Mbps Travel Wireless N Router User Manual
32