Mac-Based Wireless Access Control - Tenda A5 User Manual

guarantee better security than that provided by WEP or WPA.

3.2.3 MAC-based Wireless Access Control

The MAC-based Wireless Access Control feature can be
used to allow or disallow clients to connect to your wireless
network.
MAC Address Filter: "Permit" means to permit PCs at
specified MAC addresses to connect to your wireless network
while "Forbid" means to block PCs at specified MAC
addresses from connecting to your wireless network.
MAC Address：Enter the MAC addresses of a wireless client
and click "Add".
MAC Address List: Displays the MAC addresses added by
you. You can delete any entry by clicking on the "Delete"
button next to it.
Example 1:
To allow only a PC at the MAC address of 00:e8:c8:a4:56:75 to
connect to your wireless network, do as follows:
Step1. Select "Permit" from MAC Address Filter drop-down menu.
Step2. Enter 00:e8:c8:a4:56:75 in the MAC address box.
Step3. Click the "OK" button to save your settings and you can add
more MAC addresses, if you like, simply repeating the above
steps.
A5 150Mbps Travel Wireless N Router User Manual
39