Mazda 3 Owner's Manual page 358

Switching calls
Switching back to the previous call can
also be done.
Method 1
1. Press the pick-up button.
2. Prompt: "Swapping calls."
Method 2
1. Press the talk button with a short press.
2. Say: [Beep] "Swap calls"
3. Prompt: "Swapping calls."
Three-way call function
1. Press the talk button with a short press.
2. Say: [Beep] "Join calls"
3. Prompt: "Joining calls"
Making a call using a telephone number
1. Press the talk button with a short press.
2. Say: [Beep] "Dial"
3. Prompt: "Number, please"
4. Say: [Beep] "XXXXXXXXXXX
(Telephone number)"
5. Prompt: "XXXXXXXXXXX.
(Telephone number) After the beep,
continue to add numbers, or say
Go-Back to re-enter the last entered
numbers, or press the Pick-Up button to
execute dialing."
6. (Dialing)
Press the pick-up button or say "Dial",
then go to Step 7.
(Adding/inputting telephone
number)
Say, "XXXX" (desired telephone
number), then go to Step 5.
(Telephone number correction)
Say, "Go Back". The prompt replies,
"Go Back. The last entered numbers
have been removed.". Then go back to
Step 3.
7. Prompt: "Dialing"
Making calls using the phonebook
1. Press the talk button with a short press.
2. Say: [Beep] "Call"
3. Prompt: "Name please."
4. Say: [Beep] "XXXXX... (Ex. "John's
phone")" (Say a voice tag registered in
the phonebook.)
5. Prompt: "Calling XXXXX... (Ex.
"John's phone") XXXX (Ex. "at
home"). Is this correct?" (Voice tag and
phone number location registered in
phonebook).
6. Say: [Beep] "Yes"
7. Prompt: "Dialing"
Redialing function
1. Press the talk button with a short press.
2. Say: [Beep] "Redial"
3. Prompt: "Dialing"
Ending the current call
Press the hang-up button during the call.
DTMF (Dual Tone Multi-
Frequency Signal) Transmission
This function is used when transmitting
DTMF via the user's voice. The receiver
of a DTMF transmission is generally a
home telephone answering machine or
a company's automated guidance call
center (When you send tone signals
back according to the voice guidance
recording).
1. Press the talk button with a short press.
2. Say: [Beep] "XXXX... send" (Say
DTMF code)
3. Prompt: "Sending XXXX... (DTMF
code)"
Interior Features
®
Bluetooth
5–101