Mazda 3 Owner's Manual page 340

NOTE
®
If a Bluetooth device has already
been programmed to the vehicle as a
hands-free mobile phone, it does not
need to be programmed again when
using the device as a Bluetooth
device. Conversely, it does not need to
be programmed again as a hands-free
mobile phone if it has already been
programmed as a Bluetooth
device.
Device registration can also be done
using voice recognition.
Concerning the operation of a Bluetooth
audio device itself, refer to its instruction
manual.
®
Some Bluetooth audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
programming procedure differs depending
on whether it has a PIN code or not.
Programming a Bluetooth
which has a four-digit PIN code
1. Using the audio control dial, select
the pairing program mode " PAIR
DEVICE " in the " BT SETUP " mode.
(Refer to "Bluetooth
up" for details.)
2. Press the audio control dial to
determine the mode. After " ENTER
PIN " is displayed on the audio display
for three seconds, " PIN 0000 " is
displayed and the PIN code can be
input.
®
audio
®
audio
®
®
audio device
®
audio device set-
3. Input the PIN code of your Bluetooth
audio device by pressing channel preset
buttons 1 to 4 while " PIN 0000 " is
displayed.
Press channel preset button 1 to input
the fi rst digit, 2 for the second, 3 for the
third, and 4 for the forth. For example,
if the PIN code were "4213" press
channel preset button 1 four times (1,
2, 3, 4), button 2 twice (1, 2), button
3 once (1), and button 4 three times
(1, 2, 3). If the " PIN 0000 " display
disappears before fi nishing the PIN
code input, repeat the procedure from
Step 1.
NOTE
Some devices accept only a particular
pairing code (Usually, "0000" or
"1234").
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
4. Press the audio control dial while
the input PIN code is displayed.
" PAIRING " fl ashes on the audio
display.
5. Operate the Bluetooth
and set it to the program mode while
" PAIRING " is fl ashing.
6. When the programming is completed,
and " PAIR SUCCESS " are displayed
after about 10-30 seconds, after which
" PAIR SUCCESS " continues to be
displayed for three seconds, and then
the unit returns to the normal display.
Interior Features
®
Bluetooth
®
®
audio device
5–83