Mazda 3 Owner's Manual page 349

Interior Features
®
Bluetooth
Voice recognition learning on/off
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] "Voice training"
3. Prompt: "Enrollment is enabled/
disabled. Would you like to disable/
enable or retrain?"
4. Say: [Beep] "Disable" or "Enable"
5. When "Disable" is spoken, the voice
recognition learning is turned off.
When "Enable" is spoken, the voice
recognition learning is turned on.
6. Prompt: "Speaker Enrollment is
disabled/enabled."
®
Bluetooth Preparation (Type B)
Device programming (Pairing)
®
To use Bluetooth audio and Hands-Free,
the device equipped with Bluetooth
has to be programmed to the unit using
the following procedure. A maximum of
seven devices including Bluetooth
devices and hands-free mobile phones can
be programmed.
Pairing Procedure
1. Select the icon on the home screen
and display the Settings screen.
2. Select the
3. Select the
4. Turn the Bluetooth
5. Select the
the message and switch to the device
operation.
6. Using your device, perform a search
®
for the Bluetooth
device).
7. Select "Mazda" from the device list
searched by the device.
5–92
®
®
audio
tab.
icon.
® setting on.
icon to display
device (Peripheral
8. (Device with Bluetooth
Input the displayed 4-digit pairing code
into the device.
(Device with Bluetooth
or higher)
Make sure the displayed 6-digit code
on the audio is also displayed on the
device, and touch the
A connection license agreement may be
required depending on the device.
9. If pairing is successful, the profi le list
for the device is displayed.
10. (Devices compatible with Mazda
Email / SMS function)
SMS (Short Message Service)
messages, MMS (Multimedia
Messaging Service) messages, and
E-mail for the device are downloaded
automatically. A download permission
operation may be required depending
on your mobile device.
NOTE
When Call history and messages are
downloaded automatically, each automatic
download setting must be on.
Refer to Communication Settings on page
5-110 .
After a device is registered, the system
automatically identifi es the device. By
®
activating Bluetooth
by activating Bluetooth
after switching the ignition from OFF to
ACC, the device connection condition is
indicated in the audio display.
IMPORTANT note about pairing and
automatic reconnection:
If pairing is to be redone, fi rst clear
the programmed device indicated as
"Mazda".
®
version 2.0)
®
version 2.1
icon.
Hands-Free again, or
®
Hands-Free fi rst