Bluetooth Audio Device Information Display - Mazda 3 Owner's Manual

Interior Features
®
Bluetooth
Deleting a device
1. Using the audio control dial, select the
pairing delete mode " PAIR DELETE "
in the " BT SETUP "mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the fi rst device among the
programmed devices is displayed.
4. Rotate the audio control dial and select
the name of the programmed device
you would like to delete.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
NOTE
Only the names of programmed devices
can be displayed. If only one device is
programmed, only the name for this device
is displayed.
5. If a selection other than " GO BACK "
is made and the audio control dial is
pressed, " SURE ? NO " is displayed.
6. Rotate the audio control dial clockwise
and switch the display to " SURE ?
YES ".
5–86
NOTE
The display changes as follows depending
on whether the audio control dial is
rotated clockwise or counterclockwise.
-Clockwise: " SURE ? YES " displayed
-Counterclockwise: " SURE ? NO "
displayed
7. Press the audio control dial to delete
the selected device.
NOTE
Select " GO BACK " and press the audio
control dial to return to the " PAIR
DELETE " display.
8. " PAIR DELETED " is displayed for
three seconds after the deletion is
completed, and then it returns to the
normal display.
NOTE
If an error occurs while trying to delete
the programmed device, " Err " fl ashes
in the display for three seconds and the
display returns to " LINK DELETE ".
®
Bluetooth audio device information
display
1. Using the audio control dial, select the
pair device information display mode
"DEVICE INFO" in the "BT SETUP"
mode. (Refer to "Bluetooth
device set-up" for details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth
is displayed.
®
audio
®
unit device