Mazda 3 Owner's Manual page 351

Interior Features
®
Bluetooth
Available Language (Type B)
®
The Bluetooth Hands-Free System
applies to the following languages:
English
Spanish
French
Refer to Settings on page 5-55 .
Voice Recognition (Type B)
The Mazda Bluetooth
can be used to make calls or operate the
audio unit using voice recognition which
includes numerous convenient commands.
In this section, the basic operation of the
voice recognition is explained.
Activating Voice Recognition
Press the talk-button.
Ending Voice Recognition
Use one of the following methods:
Press the hang-up button.
Say: [Beep] "Cancel"
Perform the touch panel operation or
commander switch operation while the
vehicle is stopped.
Skipping Voice Guidance (for faster
operation)
Press and release the talk-button.
NOTE
Switch the ignition to ACC or ON
®
and the Bluetooth
becomes operational within 30 seconds.
When operating the audio unit or the
A/C while using Bluetooth
Free, the beep sounds or voice
guidance (audio unit)/cannot be heard.
5–94
®
Hands-Free system
Hands-free system
®
Hands-
Troubleshooting for Voice Recognition
If you do not understand an operation
method while in the voice recognition
mode, say "Tutorial" or "Help".
Commands useable anytime during
voice recognition
"Go Back" and "Cancel" are commands
which can be used at anytime during voice
recognition.
Returning to previous operation
This command is for returning to the
previous operation while in the voice
recognition mode.
Say: [Beep] "Go Back"
Cancel
®
The Bluetooth Hands-Free system
transitions to standby status if the
following operation is performed while the
system is activated.
Say: [Beep] "Cancel"
To prevent a deterioration in the voice
recognition rate and voice quality, the
following points should be observed:
Phone related commands are available
only when your phone is connected via
®
Bluetooth . Make sure your phone is
connected via Bluetooth
operate phone related voice commands.
Music play commands, such as Play
Artist and Play Album can be used only
in USB audio mode.
Do not speak too slowly or loudly (no
loud voice).
Speak clearly, without pausing between
words or numbers.
The hands-free system cannot perform
voice recognition while voice guidance
or a beep sound is operating. Wait until
the voice guidance or the beep sound is
fi nished before saying your commands.
®
before you