Mazda 3 Owner's Manual page 247

When Driving
Lane Departure Warning System (LDWS)
When The System Operates
1. Press the LDWS switch. The LDWS
goes on stand-by and the LDWS
warning light (amber) illuminates.
The lane indication (bordered line) is
indicated in the active driving display
(Type A instrument cluster
multi information display (Type B
instrument cluster
*1 To determine which instrument cluster
is equipped on your Mazda, Refer to
Meters and Gauges on page 4-12 .
Indication on display
4–122
*1 ) or the
*1
).
2. Drive the vehicle near the center of
the lane and the LDWS indicator light
(green) illuminates in the instrument
cluster when all of the following
conditions are met.
The vehicle is driven near the center of
the lane with the white or yellow line
on the left and right sides, or on either
side.
The vehicle speed is about 70 km/h (44
mph) or more
The vehicle is driven on a straight road
or road with gentle curves
The lane indication is indicated in
the active driving display (Type
A instrument cluster
multi information display (Type B
instrument cluster
*1 To determine which instrument cluster
is equipped on your Mazda, Refer to
Meters and Gauges on page 4-12 .
Indication on display
NOTE
The LDWS remains on stand-by until it
detects white or yellow lines on both the
left and right sides, or on either side.
When the system detects a white or
yellow line on one side only, the system
will operate the warning only when the
vehicle deviates to the side the white or
yellow line detected.
*1
) or the
*1
).