Mazda 3 Owner's Manual page 342

2. Press the audio control dial to
determine the mode.
3. The name of the currently linked
®
Bluetooth audio device is displayed.
®
If no Bluetooth audio device is
currently linked, the name of the fi rst
device among the programmed devices
is displayed.
4. Turn the audio control dial to select the
name of the device you would like to
link.
Device name 1
Device name 2
Device name 3
Device name 4
Device name 5
Device name 6
Device name 7
5. Press the audio control dial to select the
device you would like to link. The
symbol disappears, and " PAIRING "
fl ashes in the audio display.
NOTE
When " GO BACK " is selected and the
audio control dial is pressed, the display
returns to " LINK CHANGE ".
6. If the link to the desired device is
successful, the symbol is displayed
again, together with " LINK
CHANGED ". " LINK CHANGED " is
displayed for three seconds, then it
returns to the normal display.
NOTE
®
Some Bluetooth audio devices need a
certain amount of time before the
symbol is displayed.
If a hands-free type mobile phone has
been the most recently programmed
device, the Bluetooth
device. If you would like to use a
®
Bluetooth audio type device which
has been previously programmed to
®
the Bluetooth unit, the link must be
changed to this device.
If an error occurs while trying to link
a device, " Err " fl ashes in the audio
display for three seconds, and the
display returns to " LINK CHANGE ".
If this occurs, check the programming
status of the Bluetooth
and the location of the device in the
vehicle (not in the trunk or a metal-type
box), and then try the link operation
again.
Device selection can also be done using
voice recognition.
How to confi rm the device currently
linked
Switch to the link-change mode. (Refer to
"Changing the link to a Bluetooth
device")
The device name displayed fi rst is the
device which is currently linked.
Interior Features
®
Bluetooth
®
unit links this
®
audio device
®
audio
5–85