Answering Machine Base - BT Graphite 2500 User Manual

Answering machine base

Volume Down Volume Up
During playback, During playback,
decreases base increases base
loudspeaker loudspeaker
volume, page 31. volume, page 31.
In standby, press In standby, press
to decrease base to increase base
screening and screening and
playback volume. playback volume.
Delete
During playback,
deletes the
current message.
In standby, press and
hold to delete all old
messages, page 31.
Skip back/Play outgoing message
During playback, press once to
skip back to the beginning of the
current message. Press twice or
within a second after the message
starts to go back to the previous
message.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
Message indicator
Shows the number of messages.
If new messages have been received,
the number of new messages will be
displayed flashing.
If there are no new messages, the
counter will display the total number
of old messages stored.
The indicator will display:
F
= if the answer machine memory
is full.
A
= if the answer machine is being
accessed remotely.
= (flashing) if an incoming
message or outgoing message
is being recorded.
0
= (scrolling) if a memo is recording.
= if Answer only mode is set.
Skip forward
During playback, press to play
the next message, page 31.
Ans/On/Off
Switch between
answer and
record, answer
only and
answer off.
Stop Play
Press to stop playback, Press to play messages,
page 31. page 31.
13
Find / Page
Press to ring
handsets
registered to the
base, page 17.
Press and hold
to register new
handsets to the
base, page 38.
Red – battery
charging LED
indicator
Green – power is
on / line is in use