Saving The Configuration Changes; Rebooting The Ht70X From Remote; Configuration Through A Central Server - Grandstream Networks HT701 User Manual

and Port Sip port that will be annexed to the IP address above.

SAVING THE CONFIGURATION CHANGES

Click the "Update" button in the Configuration page to save the changes to the HT70X configuration. The
following screen confirms that the changes are saved. Reboot or power cycle the HT70X to make the
changes take effect.

REBOOTING THE HT70X FROM REMOTE

Press the "Reboot" button at the bottom of the configuration menu to reboot the ATA remotely. The web
browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in
again.

CONFIGURATION THROUGH A CENTRAL SERVER

Grandstream HT70X can be automatically configured from a central provisioning system.
When HT70X boots up, it will send TFTP or HTTP/HTTPS request to download configuration file,
"cfg000b82xxxxxx" or "cfg00082xxxxxx.xml", where "000b82xxxxxx" is the MAC address of the HT70X. It
will first request "cfg000b82xxxxxx" then "cfg000b82xxxxxx.xml"
The configuration file can be downloaded via TFTP or HTTP/HTTPS from the central server. A service
provider or an enterprise with large deployment of HT70X can easily manage the configuration and
service provisioning of individual devices remotely from a central server.
Grandstream has a provisioning system called GAPS (Grandstream Automated Provisioning System) that
is used to support automated configuration of Grandstream devices. GAPS uses enhanced (NAT
friendly) TFTP or HTTP (thus no NAT issues) and other communication protocols to communicate with
each individual Grandstream device for firmware upgrade, remote reboot, etc.
Grandstream provides GAPS service to VoIP service providers. Use GAPS for either simple redirection
or with certain special provisioning settings. At boot-up, Grandstream devices by default point to
Grandstream provisioning server GAPS, based on the unique MAC address of each device, GAPS
provision the devices with redirection settings so that they will be redirected to customer's TFTP or
HTTP/HTTPS server for further provisioning.
FIRMWARE VERSION 1.0.3.1 HT70X USER MANUAL Page 45 of 52