Grandstream Networks HT701 User Manual page 27

Telnet Server
IP Address
DHCP hostname
DHCP domain
DHCP vendor class ID
PPPoE account ID
PPPoE password
PPPoE Service Name
Preferred DNS server
Time Zone
FIRMWARE VERSION 1.0.3.1
Default is set to YES.
There are two modes to operate the HT70X:
DHCP mode: all the field values for the Static IP mode are not used (even though they
are still saved in the Flash memory.) The HT701 acquires its IP address from the first
DHCP server it discovers from the LAN it is connected. Using the PPPoE feature: set the
PPPoE account settings. The HT70x will establish a PPPoE session if any of the PPPoE
fields is set.
Static IP mode: configure the IP address, Subnet Mask, Default Router IP address, 1
nd
Preferred DNS Server, 2
DNS Server. These fields are set to zero by default.
Default is blank. This option specifies the name of the client. This field is optional but may
be required by some Internet Service Providers.
Default is blank. This option specifies the domain name that client should use when
resolving hostnames via the Domain Name System.
Default is HT7XX. Used by clients and servers to exchange vendor-specific information..
PPPoE username. Necessary if ISP requires you to use a PPPoE (Point to Point Protocol
over Ethernet) connection.
PPPoE account password.
Default is blank. This field is optional. If your ISP uses a service name for the PPPoE
connection, enter the service name here.
The preferred DNS Server to be used
Controls how the date/time is displayed according to the specified time zone.
HT70X USER MANUAL
rd
Preferred DNS Server, 3
th
Preferred DNS Server, 4 Preferred
Page 27 of 52
st