Saving The Configuration Changes; Rebooting The Ht802 From Remote - Grandstream Networks HT802 User Manual

Ring Tones

SAVING THE CONFIGURATION CHANGES

Click the "Update" button in the Configuration page to save the changes to the HT802 configuration. The
following screen confirms that the changes are saved. Reboot or power cycle the HT802 to make the
changes take effect.

REBOOTING THE HT802 FROM REMOTE

Press the "Reboot" button at the bottom of the configuration menu to reboot the ATA remotely. The web
browser will then display a message window to confirm that reboot is underway. Wait 30 seconds to log in
again.
FIRMWARE VERSION 1.0.0.5
This function lets you configure ring tone cadence preferences. User has 10 choices.
The configuration, completed in Distinctive Ring Tones block in the same page, applies
to ring tones cadences configured here.
HT802 USER MANUAL Page 38 of 46